Murphy Doesn't Guess.
He Listens.
Most mixing problems come from time pressure and unfamiliar rooms. Murphy solves both — by analyzing your signals in real time and acting on what he hears.
From stage to PA, Murphy is everywhere the signal goes.
↑ Continuous feedback loop ↑
The Audio Analysis Engine
Murphy doesn't just move faders. He listens to your PA through a dedicated measurement microphone and processes audio in real time — 46 frames per second of spectral analysis.
Multi-Channel Metering
Real-time RMS and peak levels across all 32 input channels, 16 bus outputs, and the main stereo mix. Software peak hold with configurable decay. 30-second rolling history for trend analysis.
31-Band Real-Time Analyzer
2048-point FFT with Hann windowing produces a full 1/3-octave RTA from 20Hz to 20kHz. EMA smoothing for stable display. Murphy sees the frequency content of your room in real time.
USB Audio Capture
Murphy taps directly into the console's 32-channel USB audio stream. A dedicated measurement mic channel feeds the analysis engine — no extra hardware interfaces needed.
5-Factor Feedback Detection
Murphy's proprietary algorithm uses five simultaneous tests — spectral prominence, bandwidth narrowness, frequency stability, sustain duration, and growth vector analysis — to detect feedback in under a second while ignoring musical content.
Automatic Feedback Suppression
When feedback is detected, Murphy applies a precision parametric EQ notch cut — starting gentle at -6dB and deepening only if needed. Your original EQ settings are saved and restored when the feedback clears.
Progressive Safety
Murphy never slams the brakes. Notch cuts ramp in progressively (-6 → -9 → -12 dB), release slowly over 2 seconds, and Murphy only touches the EQ bands you authorize. Engineer override always wins.
Upload a Stage Plot. Murphy Builds Your Scene.
Hand Murphy an input list or stage plot and he'll auto-generate your console scene — channel names, starting EQ, gain structure, monitor send suggestions, and microphone preset profiles. What used to take an hour takes minutes.
Where Murphy Is Going
Audio Analysis Engine
Multi-channel metering with peak tracking. USB audio capture from console. 31-band real-time FFT analyzer. 5-factor feedback detection algorithm. Automatic console configuration from stage plots. Murphy hears everything.
Co-Pilot Mode
Automatic feedback suppression with progressive EQ notch cuts. Auto gain staging during soundcheck. SPL monitoring and venue compliance. Murphy handles the maintenance mixing while you focus on the creative mix.
Smart Mixing
Genre-aware band profiles learned from show history. Song and set awareness with transition detection. Intelligent EQ engine with spectral target curves. Murphy understands what kind of music is playing and what the mix should sound like.
Full Autopilot
Murphy runs a complete show from soundcheck to last song. Automated gain staging, monitor ring-out, scene building, and real-time mix maintenance. Engineer supervises and overrides — Murphy handles the rest.
Console Integrations
Behringer X32 / Midas M32
Murphy's home console. Full bidirectional control via OSC — faders, EQ, gates, compression, bus sends, scene recall. Murphy knows the X32 like a veteran engineer.
Yamaha Digital Series
Full OSC integration across the CL, QL, and TF series. Murphy fits right into Yamaha's ecosystem.
Allen & Heath
dLive, Avantis, and SQ series supported. Murphy speaks their language.